

ADS200 AccuDrive™
Production Soldering Station
ADS200 AccuDrive™ Production Soldering Station delivers unsurpassed thermal performance, unequaled cost savings.
.jpg)

Stackable

Intuitive and Simple Operation
_j.jpg)
Solder the most delicate 0201 components

Stays Cool All Day
.jpg)
Solder the highest mass components & PCBs
TD-200 AccuDrive™
Tip-Heater Cartridge Iron

Beneath its sleek dimensions, comfortable ergonomics and cool touch, the TD-200 makes continuous production soldering effortless!
AccuDrive™ Tip-Heater Cartriges
Provide accurate tip temperatures, instant heat-up/recovery, and high-capacity heating — all at safe, low temperatures
Cool Touch™ Grip
Aluminum handle stays cool and comfortable even during extended production use
Comfortable & Ergonomic
Slim & lightweight, dramatically reduces grip stress and operator fatigue, enhancing productivity
Versatile & Flexible
Works safely on 0201’s, sensitive flex circuits or the highest mass, lead-free PCB’s
Ultra-Short Tip-to-Grip
Under 1.9”/48mm for precision operator dexterity when used under magnifier or microscope
ESD-Safe Design
From tip to the end of the cord, the TD-200 protects your ESD-sensitive devices
Burn-Resistant Cord
ESD-safe cord is soft and flexible, withstanding direct contact with hot tips
AccuDrive™ Blue Series
Tip-Heater Cartridges

New PACE AccuDrive™ technology combines a high-accuracy sensor and powerful heat generation in one low-cost tip cartridge!
Inexpensive Cartridges
Less than half the price of most cartridge style or curie point tips, delivers lowest cost of ownership
One Tip Geometry, AnyTemperature
Unlike with curie point tips, select any temperature for a chosen tip cartridge without having to buy additional ones
Superior Heat Transfer/Delivery
Allows for safer, lower temperatures, reduces risk of PCB damage and improves tip life
Accurate, Honest Temperatures
Consistent, accurate tip temperatures meet or exceed J-STD-001 requirements
Wide Variety of Tip Geometries Available
For the most delicate micro-soldering to challenging, high thermal mass applications
Hot-Swappable Quick-Change Tips
Fast & easy change-out within 2 seconds, without turning the unit off.
High Capacity Intergrated Heater
Delivers up to 120 Watts of pure power
Fast Initial Heat-Up
Achieves set temperature in seconds
Standard Tips
For delicate micro-soldering to challenging, high thermal mass applications

Ultra-Performance Tips
Optimized tip geometries and increased thermal mass deliver maximum heat throughput

Driven by new AccuDrive™
Control Technology
Accurate tip temperatures with maximum heat delivery!
How It Works
At the heart of the ADS200 lies PACE’s new AccuDrive™ Technology. AccuDrive™ allows you to set honest, highly-accurate temperatures, without the need to change cartridges or calibrate. Its advanced electronics provide instantaneous load sensing and on-demand power to quickly reflow solder joints at safe, low temperatures, regardless of the mass of the application
Unbeatable Results
AccuDrive™ delivers consistent, repeatable results in both light and heavy-use environments and provides the operator with the flexibility that is essential in today’s demanding production operations. Regardless of your application, AccuDrive™ delivers unsurpassed thermal performance, productivity and bottom-line cost savings
ADS200
Specifications
POWER REQUIREMENTS
P/N 8007-0578 120 VAC with Standard Tool Stand
120 Watts Maximum Output
97-127 VAC, 50/60 Hz
P/N 8007-0579 120 VAC with Instant SetBack Tool Stand
120 Watts Maximum Output
97-127 VAC, 50/60 Hz
P/N 8007-0580 230 VAC with Standard Tool Stand
120 Watts Maximum Output
197-253 VAC, 50/60 Hz
P/N 8007-0581 230 VAC with Instant SetBack Tool Stand
120 Watts Maximum Output
197-253 VAC, 50/60 Hz
ADS200 SPECIFICATIONS
-
Dimensions 104mm (4.1”) H x 130mm (5.1”) W x 152mm (6”) D
-
Weight 2.3 kg (5lbs)
-
RoHS Compliant Yes
-
Control Technology AccuDrive™
-
Tip-to-Ground Resistance 2 Ohms or less
-
Meets or Exceeds ANSI/J-STD-001 Yes
-
Tested using ANSI/ESD S13.1-2015 Yes. Tested up to 50MHz using S13.1-2015 Method. Meets or Exceeds J-STD-001 and ESD S20.20 Requirements
-
Meets or Exceeds ANSI/ESD S20.20 Yes
-
Temperature Accuracy Meets or Exceeds ANSI/J-STD-001 Requirements
-
Temperature Range 193-454°C (380-850°F)
-
Tips Uses AccuDrive™ Blue Series Tip-Heater Cartridges
-
Soldering Iron TD-200 AccuDrive™ Tip-Heater Cartridge Soldering Iron
-
Tool Stand Can hold up to 7 tips, comes standard with sponge, stay-moist well and brass wool to clean oxidation from tip
-
Optional Instant SetBack (ISB) Tool Stand Optionally available as P/N 6019-0089-P1 or standard as part of ADS200 Stations P/N 8007-0579 or P/N 8007-0581